media
FRC-12

Specifications

Model FRC-12 Driving power supply 200/220v
Type Rotary Feed/Discharge Plastic conveyor
Driving method Electricity+Pneumatic Blow air valve Mechanical type
Blow mold spec. One piece(non split) Stretch rod
movement
Combind
with air and cam
Bottle/Hour(Max.) 12,000*1 Bottom mold Inserted
to Blow mold
Number
of blow mold
12 Preform
temperature
Infrared radiation thermometer
Max.
product volume
600ml Control display LED toutvh panel
Max.
flange diameter
98mm Air;
In case of 250ml
5600nl/min *3
Max.
product hight
150mm Air;
In case of 600ml
9100nl/min *3
Number
of Mandrel
108 Air pressure
required
25-30 bar
Number
of heating zone
10 Chilled Water 30L/min @10C
Heater spec. 3.5kw x 40 Tower Water 50L/min @25C
Total
heater output
140kw *2 Lubrication Auto
Main
driving motor
5.5kw Feed/Discharge
height
1.32m(from floor)
Mandrel
driving motor
0.09kw x 2 Coveyor length 1.5m(from end)
Feed & discharge
conveyor
0.1kw x 2 Machine
Size(LxBXH)
7.4 x 2.2 x 3.1 m
Blow
of heating zone
0.75kw x 2 Blow
station(LxBxH)
2.18 x 2.2 x 3.1m
Total motor
capacity
7.38kw Heating
station(LxBXH)
5.23 x 1.24 x 2.1m
Total power
required
147.38kw Machine Weight 9.5ton
Control power
supply
24VDC
* Machine specifications are subject to change without notice.
*1 Depending on cup and preform design,output will be 240 per minute at the maximum.
*2 In case of 100% usage.
*3 In case of 200 per minute production.
Rotaty-type
Cup Reheat Stretch-blow Molding Machine
An injectin-molded high-density disk type preform is stretch-blown into a cup resulting in no material loss and cost.
High stretch ratio creates a high crystalline level on the PET/PP cup besides high physical strength and excellent clarity without cracking lengthwise at all. Heating/Blow
Heating/Blow station
Heating
Heating station

Click here to open a short movie
Preform feed/Cup discharge
Preform feed/Cup discharge station
   
Control display
Control display
cup
Cup
Multi-layer cup
Multi-layer cup
Hot fillable cup
Hot fillable cup

Biaxial Stretch-blow
Biaxial Stretch-blow station
 
Process